A-Class vs B-Class PVC Windows – What Buyers Should Know

Quick overview: A-class vs B-class PVC windows

A-class and B-class PVC windows differ mainly in profile wall thickness, energy efficiency, service life and security. Here is a clear comparison:

A-class PVC window:

B-class PVC window:

  • Profile wall thickness: below 2.5 mm
  • Service life: up to 15 years
  • Security: less durable
  • Sound insulation: weaker
  • Thermal performance: lower
  • Use: lower-budget projects (summer cottages, outbuildings, etc.)

✅ Koduaken’s advice:

If you want your windows to be secure, last a long time and keep your home quiet, choose A-class windows.


Introduction

If you are choosing new windows and comparing manufacturers, one of the biggest mistakes you can make is to choose on price alone. Why? Because not all PVC windows are equal – especially when you compare A-class and B-class profiles. In fact there are three very different profile classes: A-class, B-class and C-class.

Most people know nothing about this – and that is exactly why many end up with a cheap but low-quality window that starts causing problems after a few years.

In this article we explain:

  • What is the difference between A-class and B-class?
  • Why don’t most window factories talk about it?
  • How to make a smart, long-term choice

What is a “profile class” anyway?

A PVC window profile is a special plastic frame (e.g. VEKA) with reinforcing steel inside. The window also uses hardware – the opening mechanisms that affect its security and service life. Koduaken uses the highest-quality PVC profiles, reinforcement and Roto hardware, which sets us apart from cheaper solutions.

The most common profile classes are:

  • A-class – the strongest and most durable
  • B-class – cheaper, but weaker in quality
  • C-class – the cheapest, does not meet the European standard, the poorest quality, lasts half as long as an A-class PVC window

An A-class profile has a wall thickness of at least 2.8 mm, while a B-class profile can be under 2.5 mm. Sounds like a small difference? In reality it has a huge effect on:

  • Thermal performance
  • Sound insulation
  • The service life of the profile
  • Security (e.g. locking mechanisms work more reliably)

Why do most window factories in Estonia sell B-class PVC windows?

The reason is simple: PRICE

A B-class profile is:

  • Cheaper to produce
  • Easier to sell (a low price attracts buyers)
  • More profitable for the factory

But here is the problem – the customer is often left in the dark. If you don’t ask, nobody will tell you what profile you are getting. Some salespeople simply say “PVC window” or “German profile” but never mention that it is a B-class profile that may sag over time, wear its seals, let in the cold and noise, and eventually stop opening properly.

Koduaken does things differently. We use only A-class VEKA and ALUPROF profiles, known in Europe for their top quality and certified compliance with the highest standards.

How do A-class or B-class PVC windows affect you as a homeowner?

👉 Service life
B-class windows need maintenance or replacement more often. Many problem cases are linked precisely to cheaper profiles.

👉 Security
A-class window frames are stronger and more resistant to mechanical impact. Security starts with the frames and the hardware – Koduaken uses quality Roto hardware in every window for stable and safe use.

👉 Sound insulation
Especially in larger cities (Tallinn, Tartu) or areas with heavy traffic, sound insulation is essential. A-class keeps street noise out noticeably more effectively.

👉 Heat loss
B-class windows can have much poorer thermal performance. That means higher heating bills in winter and more heat in summer.

Are B-class PVC windows cheaper and therefore a better choice?

This is a classic trap many buyers fall into. If you choose a window on price alone, you save €100–300 today but pay it back over the following years in energy costs, problems or even replacing the windows.

A good plastic window lasts 20–30 years. Would you like to have several problems during that time? Or would you rather have a worry-free, warm home?

How to recognise an A-class window

  1. Ask for the name of the profile manufacturer (e.g. VEKA, ALUPROF)
  2. Check whether the profile has an A-class certificate
  3. Ask for the exact product data sheet or technical information
  4. Check that the window has CE marking and an ISO 9001 certificate
  5. Also find out what hardware is used (e.g. Roto) – quality hardware means better security and reliability

NOTE: if the manufacturer or seller does not want to share this information, that is a red flag!

What does Koduaken do differently?

Top quality starts with the details:

  • Only A-class profiles
  • All information is open and transparent
  • 25+ years of experience on the Estonian market
  • Our windows are built for the local climate (wind, frost, rain, UV)
  • Our own factory and an experienced team
  • You can also order measuring, transport and installation together

Get in touch!

📩 Fill in the price inquiry form or write to us at info@koduaken.ee – we will help you at every step!


Summary: know what you are buying

In Estonia there is a lot of talk about “PVC windows” and “German profiles”, but little is said about quality. A-class and B-class are not marketing terms – they are technical standards that have a real impact on your home.

If you want your home to be safer, quieter and more durable, choose a manufacturer that does not cut corners on quality. Koduaken is the only manufacturer in Estonia that focuses exclusively on A-class profiles. We make no compromises – and neither should your home.


Frequently asked questions

1) Are A-class PVC windows really better than B-class windows?

Yes. A-class PVC windows are more stable, more secure and last longer. The profile has thicker walls and is suitable even for passive houses. B-class windows are cheaper, but their service life and durability are noticeably lower.

2) How can I tell whether a window is A-class?

Before ordering, ask for the name of the profile manufacturer (e.g. VEKA), the A-class certificate (e.g. EN 12608) and CE marking. Also check whether quality hardware such as Roto is used. A serious manufacturer always shares technical information.

3) How much more expensive is an A-class PVC window than a B-class one?

The price difference is usually 15–20%. But A-class PVC windows last significantly longer, offer more security and cause fewer problems.

4) What problems can occur with B-class PVC windows?

Typical issues are:

  • Sagging frames → cold bridges
  • Seals wear out faster
  • Poorer sound insulation
  • Shorter service life and more frequent maintenance

5) How does the PVC window profile affect home security?

A-class profiles are stronger and harder to break through. Accurate installation matters too, and with quality hardware (as used by Koduaken) the window offers better protection against break-ins.


Read more: